SW4025 24V~36V Underwater motor waterproof motor thrust 7kg~9kg

Vic-Tech | SW4025 Underwater Motor Description:

SW4025 underwater brushless motor is rated at 24~36 V DC, specially designed for underwater drones/robots.

This model has no propeller, users can design their own propeller and fix it with screws.

This is ordinary brushless motor, it can be driven by any ordinary drone ESC controller or ordinary brushless motor controller.

Beautiful shape, long life, low noise technology, high energy saving rate, high torque and high precision.

It is widely used in precision electronic equipment, automation equipment, water and underwater equipment, model aircraft drones and intelligent robots.

Before you place an order, please make sure you have the ability to design the propeller.

Vic-Tech | SW4025 Underwater Motor Parameters:

Vic-Tech | SW4025 Underwater Motor Design drawing:

SW4025 Underwater Motor characteristic curve:

Vic-Tech | SW4025 Underwater Motor Customisable:

Customization service:

Available in long and short shaft versions.

Available in versions with and without stand.

Available in long and short versions.

Available in clockwise and counterclockwise versions

(CW and CCW).

KV values can be customized.

Vic-Tech | SW4025 Underwater Motor Application:

Application:

Widely used in precision electronic instruments, automation equipment, ROV Robots Drones, model drones and intelligent robots and other fields.

About underwater motors:

Because brushless motor uses electronic commutation, so let brushless motor operation need to adapt to the motor voltage DC power supply, driver (ESC) and speed control signal.

Take a common model ESC as an example, first disconnect the power supply, connect the motor leads and speed signal line, the throttle travel to the highest (full duty cycle), connected to the power supply, you will hear the "drop" two sounds, the throttle travel quickly to the lowest position, and then you can hear the normal start of the motor "drop ---- drop" sound, the throttle travel calibration is complete, you can start the motor normally. (The operation mode of ESC may be different for different manufacturers, please refer to the manual of the corresponding ESC model or consult the ESC manufacturer for details)

Customers can use regular drone ESC (Electrical speed control) to drive this motor.

We only produce motors, and we do not provide ESC.

3、Keep the cavity dry to avoid the motor and motor being corroded and oxidized, resulting in poor contact or leakage.

Lead time and packaging information:

Lead time for samples:

Standard motors in stock: within 3 days

Standard motors not in stock: within 15 days

Customized products: About 25~30 days (based on complexity of customization)

Lead time for building a new mold: generally about 45 days

Lead time for mass production: based on order quantity

Packaging:

Samples are packed in foam sponge with a paper box, shipped by express

Mass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air)

If shipped by sea, product will be packed on pallets

Shipping method:

On samples and air shipping , we use Fedex/TNT/UPS/DHL. (5~12 days for express service)

For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)

FAQ:

1. Are you a manufacturer?

Yes, we are a manufacture, and we produces mainly stepper motors.

2. Where is your factory location? Can we visit your factory?

Our factory is located in changzhou, jiangsu. Yes, you are very welcome to visit us.

3. Can you provide free samples?

No, we don’t provide free samples. Customers won’t treat free samples fairly.

4. Who pays for shipping cost? Can I use my shipping account?

Customers pay for shipping cost. We will quote you shipping cost.

If you think you have cheaper/more convenient shipping method, we can use you shipping account.

5. What’s you MOQ? Can I order one motor?

We don’t have MOQ, and you can order only one piece sample.

But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up.

6. We are developing a new project, do you provide customization service? Can we sign a NDA contract?

We have over 20 years of experience in stepper motor industry.

We have developed many projects,  we can provide full set customization from design drawing to production.

We are confident we can give you few advice/suggestions for your stepper motor project.

If you are worrying about confidential issues, yes, we can sign a NDA contract.

7. Do you sell drivers? Do you produce them?

Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production.

We do not produce drivers, we only produce stepper motors