12vDC 25mm geared stepper motor Support customized sample delivery

Vic-Tech | 25mm geared stepper motor Description：

This motor is a 25 mm diameter motor with a height of 25 mm. The basic step angle of the motor is 7.5 degrees.

After the reducer decelerates, the step angle resolution can reach 0.075~0.75 degrees, which can achieve accurate position control and other functions.

Product standard gear reduction ratio: 1:10 1:15 1:20 1:30 1:30 1:60 1:75 1:100.

On the basis of matching reducer with stepping motor, the stepping motor adopts an external reducer with built-in structure and metal gears, which are easy to transmit greater torque.

This product is mainly used for toilet valve, camera, PTZ and other occasions.

Vic-Tech | 25mm geared stepper motor parameters:

Vic-Tech | 25mm geared stepper motor Design drawing:

Example of the same type of motor：

About geared stepper motors:

The gear box has high precision, high efficiency and low noise, which makes the product have good reliability.

The power input position of the stepper motor can be in the form of FPC, FFC, PCB cable, etc.

The output shaft of the motor can adopt various output structures, such as circular shaft, D-shaft and wire bar.

Vic-Tech | 25mm geared stepper motor Application:

Geared stepper motors, widely used in Smart home, personal care, home appliance equipment, smart medical equipment, smart robot, smart logistics, smart cars, communication equipment, smart wearable devices, consumer electronics, camera equipment, and other industries.

Lead time and packaging information:

Lead time for samples:

Standard motors in stock: within 3 days

Standard motors not in stock: within 15 days

Customized products: About 25~30 days (based on complexity of customization)

Lead time for building a new mold: generally about 45 days

Lead time for mass production: based on order quantity

Packaging:

Samples are packed in foam sponge with a paper box, shipped by express

Mass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air)

If shipped by sea, product will be packed on pallets

Shipping method:

On samples and air shipping , we use Fedex/TNT/UPS/DHL. (5~12 days for express service)

For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)

FAQ:

1. Are you a manufacturer?

Yes, we are a manufacture, and we produces mainly stepper motors.

2. Where is your factory location? Can we visit your factory?

Our factory is located in Changzhou, Jiangsu. Yes, you are very welcome to visit us.

3. Can you provide free samples?

No, we don’t provide free samples. Customers won’t treat free samples fairly.

4. Who pays for shipping cost? Can I use my shipping account?

Customers pay for shipping cost. We will quote you shipping cost.

If you think you have cheaper/more convenient shipping method, we can use you shipping account.

5. What’s you MOQ? Can I order one motor?

We don’t have MOQ, and you can order only one piece sample.

But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up.

6. We are developing a new project, do you provide customization service? Can we sign a NDA contract?

We have over 20 years of experience in stepper motor industry.

We have developed many projects,  we can provide full set customization from design drawing to production.

We are confident we can give you few advice/suggestions for your stepper motor project.

If you are worrying about confidential issues, yes, we can sign a NDA contract.

7. Do you sell drivers? Do you produce them?

Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production.

We do not produce drivers, we only produce stepper motors